News

Touch Dimmer Switch Project Circuit

By simply touching this touch dimmer switch you’ll be able to increase the sunshine intensity of incandescent lamps in three steps. Initially, when mains switch is on, the bulb is off. Now, in the event you touch the touch plate, the bulb glows dimly. On second touch, the bulb gives medium light. On the third touch, the bulb is driven fully. Another touch puts off the sunshine.

The touch dimmer is built around 8-pin CMOS IC TT8486A/TT6061A specifically manufactured for touch dimmer switches applications. Because the IC is extremely sensitive, use a long wire to connect the IC to the touch sensor. The circuit uses minimum external components. For touch plate, you need to use a simple copper plate of 1cm×1cm or even the top of the lead wire. Touch plate is coupled to the touch detector through 820pF, 2kV capacitors C1, C2, and C3 connected in series.

Touch dimmer switch circuit diagram

Capacitors C1, C2, and C3 connected between touch input pin 4 and touch plate remove the shock potential from the touch plate, so don’t replace these capacitors with a single capacitor or with a capacitor of a lower voltage rating. Mains potential exists in the circuit. Evidently, it’s dangerous to touch the dimmer switch circuit when mains is on.

Be the First to comment.

Leave a Comment

Your email address will not be published. Required fields are marked *