News

Dataprobe IBoot G2 Remote Reboot Power Switch

The Dataprobe iBoot-G2 is a 10/100 Ethernet network attached, IP addressed, Web Controlled remote reboot power switch. Anyone with a web browser can access the iBoot-G2 to perform power On, Off or Reboot (timed power shutdown) operations. iBoot-G2 is password protected for security. The iBoot-G2 uses international standard IEC320 connections and is auto sensing for worldwide use. Line cord and Output Cord are included for North America. The iBoot-G2 handles circuits as much as 12 Amps (10 Amps at 230VAC).

– Remote Power Control out of your Web Browser- Just point your browser to iBoot’s IP address, enter the Password and you are one click away from power ON, OFF or a timed Reboot. It’s that simple.

  • The unique Auto-Ping feature allows iBoot-G2 to watch any IP device on the network and take automatic action whenever the device is down.
  • The Heartbeat Detect feature allows iBoot-G2 to monitor any server or PC running either the free Heartbeat Generator Program, or heartbeats integrated into your custom software. Dataprobe can provide developer support to make integration easy.

– This kit allows any iBoot-G2 Series unit to be either Wall or DIN Rail Mounted.

Pays for Itself with the first Service Call Saved

Don’t let the price of downtime keep you from meeting your service and revenue expectations. Keep your critical systems running without expensive service calls. Use low-cost remote power control to automatically reboot failed devices and rise up and running in the most cost effective way possible.

iBoot-G2 will prevent money and time by reducing costly downtime. Just point your browser to the iBoot-G2, login and you’re one click away from bringing that failed system back to life. iBoot-G2 will even detect failed systems and take immediate action.

Remote Reboot via Web Browser

iBoot Cloud Service ?Power Control Wherever you might be

iBoot Cloud Service (iBCS) allows customers with iBoot-G2 to access and control multiple iBoots in multiple locations from a single portal with a single sign-on.

iBCS is not going to only make using iBoots easier, by consolidating all units into one sign-on and interface, it may also enhance the number of situations where iBoot can be deployed.

  • Customers with Dynamic IP addressing to always have the ability to access their iBoot from any location.
  • Service providers manage multiple customer accounts with diverse security configurations.
  • Customers that aren’t allow in-bound connections to access their iBoots.

Automatic Downtime Reboot

AutoPing

iBoot-G2 automatically monitors and protects your network. AutoPing continuously tests your connectivity to the internet or to any device in your network. When the network is down, or the device stops functioning, iBoot-G2 reboots the failed system to get you back on-line fast.

You have complete control of the AutoPing parameters, setting the frequency of the tests, the number of tests required to take action, and what action is to be taken when the failure is detected. Perfect for:

– Cable Modems

  • Routers
  • DSL
  • Web Cams

iBoot-G2 Features

Web Browser Power Control: Clean Web page design for immediate status and power control. Auto detects mobile browsers. No special software required.
Automatic System Restoral: AutoPing and Heartbeat detect network or equipment outage and takes immediate action to restore your network or device. Real time scheduling to have a fresh reboot each morning or minimize power waste at night.
Cloud Control: Manage all your iBoots from a single sign-on. Control power worldwide from any web browser, anytime anywhere.
USB Port: Out-of-band management with simple serial commands for status, control and setup.
UL Listed: We take your safety seriously. Be confident to pass fire marshal inspections.
Dual Password Protected: Separate user and administrator passwords. Deploy iBoot-G2 throughout your organization.
IP Addressed, 10/100 Base-T: Use on any Ethernet IP network. Public or private. Supports DHCP and alternate ports for Web Access.
Direct TCP and Software Control: Control iBoot-G2 directly from your software application for the very best degree of power control integration. Simple protocol is freely available. Use iBoot-G2 control program to call power control from any network management system. IPSentry What’sUp Gold, etc.
110/220 VAC Operation: Auto ranging power input. Deploy iBoot-G2 anywhere on the earth.

Be the First to comment.

Leave a Comment

Your email address will not be published. Required fields are marked *